Hi,
the Key (button) transpose the song playback only, not the Midi-out.
I have connected a TC-Helicon VoiceWorks on the Midi-Out.
The track for the vocal harmonizer is 16. Normaly it works,
only if I use the key to transpose the song, midi out sends the cores
not transposed to the VH. I can help me to switch the parameter
in Midi -<Edit Song Parts -> TxShift and the VH plays correct.
Only this a protracted way. See I not the right parameter, that
the transpose with the key works in time for the song part (SMF)

and to my VH?

Any idea?

Roland Germany wrote:

ein alternativer Parameter ist für Ihr Anliegen leider nicht verfügbar. Ich habe Ihr Anliegen nach Japan gesendet falls ich etwas übersehen habe oder für ein eventuelles Firmware Update.

( a alternative parameter is not available. I give this to Japan for a possible update)

regards
Herbert

Hi

Mode has if I change the key, and this one is when playing a Midis, the key also displayed in the connected video monitor suitably for the modification stopped song.
However, if song+share, however, are stopped under mode, the displayed key is not specified.
This this is a design problem, a bug now or so wanted, why, however, not discloses oneself to me.

Greeting
Herbert

written with a PC-translator

Hi,

look to page 5 left upper corner of Addendum v1.06

RX Commen Exp    Settings off, 1-16

This parameter allows you to specify that
Exxpression messages received on the channel
you select here (1-16) should affect all of the BK-7m's parts
(except for the song parts) Select "Off" if Expression
messages should only affect the part that receives on
the MIDI channel used by the Expression messages.

Herbert

Hi,

I have no problems to change "Soft thru" to Global, Piano and off with "exit"
then I go return in the menue. The Bk-7m is on this way not locking, its work well.

Only the menue structure is on my BK-7m V1.06 in the following manner:
Menu -> Midi -> Edit System -> Parameters -> Soft Thru

I hope this is helping you

Herbert

Hi,

here is a editor for Lyrics in MP3, the BK-7m can read and display than this MP3.

First you must insert a ID3v2.3 Tag in the MP3, I do this with the "MP3tag".

Then you can start the "SYLT Editor"  you can find this editor by www.compuphase.com
the rest can you read in the manual from the Editor.

Herbert

Hallo Silvio,

besten Dank für deine Hilfe, genau diesen Parameter habe ich gesucht. Klappt wunderbar. Gleichzeitig habe ich auch den Audio In Transponse wieder auf OFF gestellt, da die Latenz des Umrechnens doch sehr hoch ist, durch den Update von 1.05 auf 1.06 wurde dieser Parameter wieder auf seinen Grundwert gestellt.

-------------
Hi Silvio
thanks for help. This was the parameter, what I searched.

-------------
Sorry Diki,
I think, after Silvio has read my "bad english" he write me in german. Thanks for the advice to the non-english forum. 

regards
Herbert

Hi all,

if I play a SMF Midi File and mute one track it works correct. My problem is, I have on the audio input sockets my Voice-Harmonizer connected, if I push the TRACK MUTE key, on the Audio-Input also the the Center Cancel works. What can I do, that only the Midi track is muted and the Audio Input works normaly?
I found no Paramater in the Menue that can to do this.

Herbert

Hi,

the download Vers. 1.06

http://www.rolandce.com/be/nl/ondersteuning/downloads

Herbert

Hi,

Yes it goes, MP3 with Lyric on my BK-7m.

I called the support Roland Germany, and it send me a MP3 and it works correct on my BK-7m and on my TV I can see the Lyric.
On my Question what the format from this MP3, it is a specific Roland Format, an in the future, Roland will offer a PC Program that you can build from a normal MP3 a MP3 with Lyric.

Sorry, for my bad english

greetings
Herbert